Hi Jesse, The issue is likely related to working with geolocated models. You can check if the model is very far from the project base coordinate (0,0,0) by selecting an object and clicking on Get Bounding Box from under 3D Properties - If it's a large value, i.e., has values with " e " in it, then it's far from the base coordinates. Assuming that's the case, SYNCHRO 4D Pro does not work nicely with a geolocated model and hence the camera/selection issues you are facing. The workaround is to re-locate the project closer to the project base coordinate (0,0,0) within the original modeling software, before exporting it out. You can try enabling double-precision setting from under Options > 3D View > Advanced > Driver . This should help to deal with such models, but the feature is in a beta stage and may have a hit on the overall performance of the model. The last option would be to use iModel workflows through SYNCHRO Control, details for which you can find here - https://communities.bentley.com/products/construction/w/construction__wiki/51887/choosing-between-synchro-4d-pro-importers-and-imodel-connections-to-add-3d-models
↧