Wiki Page: SYNCHRO Scheduler
CPM Scheduling Create your schedule from scratch in SYNCHRO Scheduler. Add task descriptions, durations, and logic, and let the SYNCHRO CPM engine calculate start and finish dates and the Critical...
View ArticleWiki Page: SYNCHRO Modeler
SYNCHRO Modeler turns design models into constructible models, enabling model-based workflows like quantity take-off (QTO), Planning and Field Operations with a simple tool that makes models accessible...
View ArticleWiki Page: SYNCHRO Open Viewer
View Complete Project Files SYNCHRO Open Viewer allows you to open 4D project files created by others in SYNCHRO Pro. Inspect the schedule in the Gantt chart and 3D view. Play the construction sequence...
View ArticleWiki Page: Known Issues - SYNCHRO 4D
Listed below are current known issues. Please try the suggested workaround. If that does not help, contact synchrosupport@bentley.com for technical support. SYNCHRO Pro - 4D Pro Trial message window...
View ArticleWiki Page: SYNCHRO Pro
SYNCHRO 4D Pro - 4D Virtual Construction Scheduling and Simulation Technology SYNCHRO 4D Pro is an advanced software tool to plan, schedule, and manage construction projects in a 4D environment....
View ArticleWiki Page: Supported 3D File formats
The following 3D file formats can be imported directly into the latest version of SYNCHRO Pro Product: File Extension(s): Version(s): Note(s): ACIS SAT, SAB up to 2019 Alias Wavefront OBJ All Versions...
View ArticleWiki Page: Starting a new project that will use iModel Connections
When starting a new 4D project, you must decide whether the 3D models will be imported via the 3D importers in SYCNHRO 4D Pro or whether the models will be bridged into the iModel using the iModel...
View ArticleForum Post: RE: Maximum number of activity imported from P6(xml)
Yes, there's a limitation of the number of Tasks supported in a trial version of SYNCHRO Pro 2019, however, this will be removed in the upcoming 2020 version, which should be releasing any time now!
View ArticleWiki Page: SYNCHRO 4D Pro
SYNCHRO 4D Pro - 4D Virtual Construction Scheduling and Simulation Technology SYNCHRO 4D Pro is an advanced software tool to plan, schedule, and manage construction projects in a 4D environment....
View ArticleWiki Page: Opening a SYNCHRO Control project in SYNCHRO 4D Pro
Once a 4D project has been set up in SYNCHRO Control and you are added as a user to that project, you may open it from SYNCHRO 4D Pro and begin working on the 4D model. To do this: Run SYNCHRO 4D Pro...
View ArticleWiki Page: Differences between SYNCHRO 4D and SYNCHRO Workgroup Project (SWP)
Working on a cloud-hosted 4D collaboration project is like working with SYNCHRO Workgroup Project in previous versions. However, there are several differences and a few known issues as documented...
View ArticleWiki Page: Setting up a 4D Project in SYNCHRO Control
Whether you are starting completely from scratch on a new SYNCHRO project, are starting to collaborate for the first time on an existing private project (.sp file), or are upgrading an existing...
View ArticleWiki Page: Upgrading an existing private project (.sp file)
This section will explain how to upload an existing .sp file to the cloud in SYNCHRO Control so that project members can begin collaborating on the project from SYNCHRO 4D Pro, SYNCHRO Control and...
View ArticleWiki Page: Synchronizing updated 3D Models
When updated models are available these can by synchronized from. Assigned 3D resources will retain their assignment to the schedule in SYCNHRO 4D Pro. If you have chosen to use the 3D importers in...
View ArticleWiki Page: Reviewing the 4D Project in SYNCHRO Control
Stakeholders can now review the 4D sequence on the web, no install or powerful hardware required! After upgrading an existing SYNCHRO project or starting a new 4D collaboration project in SYNCHRO...
View ArticleWiki Page: Known Issues - 4D collaboration projects
Below are a few known issues for the initial release of the SYNCHRO 4D Pro collaboration workflow: 1. When uploading an existing .sp file to seed an iModel, the deployment will fail if the project...
View ArticleWiki Page: Collaborating on a project in SYNCHRO 4D Pro
This section explains how to work in a connected project once you have opened it in 4D Pro Once you have opened a Control project in SYNCHRO 4D Pro, you will remain connected to the project as long as...
View ArticleWiki Page: Starting a new project that will use the 3D importers in SYNCHRO...
When starting a new 4D project, you must decide whether the 3D models will be imported via the 3D importers in SYCNHRO 4D Pro or whether the models will be bridged into the iModel using iModel...
View ArticleWiki Page: Upgrading an existing SWP project
If you have a SYNCHRO Workgroup Project that you would like to upgrade from a previous version, you will need to save the project as a private project (.sp file). SYNCHRO 4D Pro (6.3) does not connect...
View ArticleWiki Page: Adding users to a SYNCHRO Control project and managing permissions
When working with a SYNCHRO Control Project users, roles, and permissions are all managed in SYNCHRO Control (web). Users and Roles will no longer be managed inside of SYNCHRO 4D Pro (desktop). To...
View Article